Sharp PN-C703B Operation Manual

Sharp PN-C703B Manual

Get Sharp PN-C703B PDF manuals and user guides View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-C703B manual content summary:

  • Sharp PN-C703B | Operation Manual - Page 1
    PN-C703B LCD MONITOR OPERATION MANUAL
  • Sharp PN-C703B | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-C703B | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-C703B | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-C703B | Operation Manual - Page 5
    spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • sides of the batteries according to the instructions in the compartment. • Do not mix reaction control in nuclear facility, medical life support system, and missile launch control in a weapon
  • Sharp PN-C703B | Operation Manual - Page 6
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way
  • Sharp PN-C703B | Operation Manual - Page 7
    SAFETY INSTRUCTIONS a cleaning of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Do not touch the screen while the PC it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft and Windows are registered
  • Sharp PN-C703B | Operation Manual - Page 8
    removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by
  • Sharp PN-C703B | Operation Manual - Page 9
    3 DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 IMPORTANT SAFETY INSTRUCTIONS 6 TIPS AND SAFETY INSTRUCTIONS 7 MOUNTING Troubleshooting 31 Specifications 33 Mounting Precautions (For SHARP dealers and service engineers 38 For information on the Pen Software, see the Pen Software Operation Manual
  • Sharp PN-C703B | Operation Manual - Page 10
    Touch Display Link License: 1  Setup Manual: 1  Touch pen: 1  SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions driver. E 10
  • Sharp PN-C703B | Operation Manual - Page 11
    nFront view Part Names 4 4 4 4 1 2 3 1. Remote control sensor (See page 16.) 2. Power LED (See page 17.) 3. Speakers 5 3 4. Infrared transmitter/receiver 5. Tray (See page 38.) nRear view 6 7 13 8 14 9 15 16 17 10 18 11 19 20 21 22 24 12 23 6. Vents 7. POWER button (See
  • Sharp PN-C703B | Operation Manual - Page 12
    Part Names nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 21.) 4. VOL +/- buttons (See page 21.) Cursor control ( / / / ) buttons 5. DISPLAY/F1 button (See page 21.) 6. MODE/F2 button (See page 21.) 7. INPUT
  • Sharp PN-C703B | Operation Manual - Page 13
    plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the connected to the input and output terminals may cause malfunctions and the other problems. • Do not use any cable that has a damaged or deformed
  • Sharp PN-C703B | Operation Manual - Page 14
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. • When all connections are complete, connect the power cord. 1. Plug the power cord (supplied) into the AC input terminal. 2. Plug the power cord (supplied) into the AC power outlet. TIPS • Be sure to clamp the
  • Sharp PN-C703B | Operation Manual - Page 15
    Affixing the Stand Hole Protection Covers After installing the monitor, affix the stand hole protection covers. 1. Peel off the backing sheet and affix the cover on the monitor. 15 E
  • Sharp PN-C703B | Operation Manual - Page 16
    .4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS
  • Sharp PN-C703B | Operation Manual - Page 17
    Turning Power On/Off Caution • When all connections are complete, turn on the power. • Turn on the monitor first before turning on the computer or playback device. • Even when the power is turned off with the POWER button on the monitor, a minute amount of power is consumed if the power cord is
  • Sharp PN-C703B | Operation Manual - Page 18
    . For details, check Windows Help and the application's support documentation. Double-tap Same action as double-clicking a mouse For the procedures for using the touch pen in the Pen Software, see the Pen Software Operation Manual. nCommon finger and touch pen actions Single-tap Same action as
  • Sharp PN-C703B | Operation Manual - Page 19
    Touch action Drag-and-drop Same action as drag-and-drop with a mouse. Touch the screen with your finger/touch pen and move without lifting. When you have finished the movement, lift your finger/ touch pen. nFinger actions Zoom Use in a screen that is capable of enlargement/reduction. Touch the
  • Sharp PN-C703B | Operation Manual - Page 20
    (position alignment) is performed automatically. Touch Pen Pen tip Eraser The eraser is used with the Pen Software. For the procedure for using the eraser, refer to the Pen Software Operation Manual. TIPS • If the pen tip becomes worn or damaged, replace it. To purchase a new pen tip, consult
  • Sharp PN-C703B | Operation Manual - Page 21
    Basic Operation Using the buttons on the remote control unit and monitor nRemote control unit nButtons on the monitor 1 2 3 3 5 4 1/6 5 6 7 9 8 4 10 1. INPUT (Input mode selection) The menu is displayed. Press or mode, and press ENTER to enter. to select the input Input mode HDMI1
  • Sharp PN-C703B | Operation Manual - Page 22
    the image may be lost or appear distorted. If you wish to respect the creator's intentions, set the screen size to "NORMAL". • When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of
  • Sharp PN-C703B | Operation Manual - Page 23
    4. Press or to select CONTRAST. ADJUST PICTURE QUALITY PC CLEAR PICTURE PROCESSING BRIGHT +16 CONTRAST 32 BLACK LEVEL 0 COLORS 0 TINT 0 SHARPNESS 0 RETURN 5. Press or to adjust the setting. ADJUST PICTURE QUALITY PC CLEAR PICTURE PROCESSING BRIGHT +16 CONTRAST 40 BLACK LEVEL
  • Sharp PN-C703B | Operation Manual - Page 24
    of the PICTURE menu items to the factory default settings. Do not reset PICTURE MODE and SIZE. For BRIGHT, CONTRAST, BLACK LEVEL, COLORS, TINT, and SHARPNESS, reset only the values of the currently selected PICTURE MODE, and do not reset the values of the PICTURE MODE which is not selected. E 24
  • Sharp PN-C703B | Operation Manual - Page 25
    up. The user will need to use the remote control unit to manually restore power to the monitor. OFF IF NO OPERATION Determines whether or not Sets the display language for the menu screen. SOFTWARE VERSION You can check the current version of the software. ALL RESET Resets all the settings to the
  • Sharp PN-C703B | Operation Manual - Page 26
    input signal. SCREEN (PC (INPUT6)) INPUT SIGNAL When the D-sub input signal cannot be detected, manually set the resolution for the signal. Select 1280 x 768 or 1360 x 768. AUTO SYNC. SIGNAL and AUTO SYNC.. SYSTEM UPDATE(SERVICE ONLY) Used when updating the software. (For service technicians.) E 26
  • Sharp PN-C703B | Operation Manual - Page 27
    [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe] in the [Monitor] folder. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the
  • Sharp PN-C703B | Operation Manual - Page 28
    Functional Restriction Setting (FUNCTION) You can restrict operations. 1. Hold SIZE down until "F" appears in the left of the screen. 2. While "F" appears, press , , , in that order. FUNCTION POWER BUTTON LOCK [OFF ] RC LOCK [OFF ] MONITOR LOCK [OFF ] MENU LOCK [OFF ] EXECUTE 3.
  • Sharp PN-C703B | Operation Manual - Page 29
    • "ERR" may be returned when a command cannot be received correctly due to interference from the surrounding environment. Please ensure that the system or software retries the command if this occurs. nCommunication interval • After OK or ERR is returned, you must send the following commands. To set
  • Sharp PN-C703B | Operation Manual - Page 30
    PC Set the volume. (0 - 100) (When AUDIO OUTPUT is set to VARIABLE, the Parameter (0 - 100) is supported for the setting value (-100 - 0).) Adjust the horizontal position of the image. (000 - 180) (PC (INPUT6)) AUTO WIDE, the current value is not an auto sized value but a value set manually. E 30
  • Sharp PN-C703B | Operation Manual - Page 31
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no Power LED flashes red. • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. Power LED flashes green. • High temperature
  • Sharp PN-C703B | Operation Manual - Page 32
    Troubleshooting The power LED is flashing. When "TEMPERATURE" is displayed in the corner of the screen. • To prevent high-temperature-related problems, "TEMPERATURE" is displayed on the screen monitor or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. E 32
  • Sharp PN-C703B | Operation Manual - Page 33
    Specifications nProduct Specifications Model PN-C703B LCD component 70" Class [69-1/2 inch (176.6cm) diagonal] TFT : 23 W or less. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice
  • Sharp PN-C703B | Operation Manual - Page 34
    [83] 31-11/16 [805] When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the
  • Sharp PN-C703B | Operation Manual - Page 35
    between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method
  • Sharp PN-C703B | Operation Manual - Page 36
    Specifications nCompatible signal timing (AV) Screen resolution 1920 × 1080p 1920 × 1080i 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz HDMI
  • Sharp PN-C703B | Operation Manual - Page 37
    nD-sub input terminal pins (Mini D-sub 15 pin) No. Function No. Function 1 Red video signal input 9 +5V 2 Green video signal input 10 GND 3 Blue video signal input 11 N.C. 4 N.C. 12 DDC data 5 GND 13 Hsync signal input 6 GND for red video signal 14 Vsync signal input 7 GND for green
  • Sharp PN-C703B | Operation Manual - Page 38
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the - 3/8 inch (8-10 mm) Screws (M6) Bracket The monitor mounting • Do not use an impact driver. • After mounting, please carefully ensure the monitor is secure, and not able to come loose from the
  • Sharp PN-C703B | Operation Manual - Page 39
    PN-C703B M EN15D(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
PN-C703B
LCD MONITOR
OPERATION MANUAL