Sharp PN-C703B Operation Manual - Page 30
RS-232C command table, How to read the command table, Function, Command, Parameter, Settings, POWER
View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 29.) Parameter: Parameter field (See page 29.) * : Enter the number in brackets in the settings : Enter a space TIPS • In the standby mode, the only command that is used is POWER CONTROL. The operation of commands not indicated in the table below is not guaranteed. Function POWER CONTROL INPUT MODE SELECTION PICTURE MODE SELECTION VOLUME SCREEN SCREEN SIZE* MUTE Command P OWR P OWR I TGD Parameter 0 1 I AVD * AVMD 0 AVMD 1 AVMD 2 AVMD 5 AVMD 6 AVMD 7 VOLM * * * HPOS * * * VPOS * * * CLCK * * * PHSE * * * WI DE0 WI DE7 WI DE9 WI DE1 0 WI DE1 1 MU T E 0 MU T E 1 MU T E 2 Settings Switches to standby mode. Enters the power ON state. Toggle change for input mode. Change to the INPUT1 to 6 terminal. (1 - 6) Toggle change for PICTURE MODE. STANDARD MOVIE DYNAMIC DYNAMIC (FIXED) PC Set the volume. (0 - 100) (When AUDIO OUTPUT is set to VARIABLE, the Parameter (0 - 100) is supported for the setting value (-100 - 0).) Adjust the horizontal position of the image. (000 - 180) (PC (INPUT6)) Adjust the vertical position of the image. (000 - 120) (PC (INPUT6)) Set the frequency of the sampling clock of the picture. (000 - 180) (PC (INPUT6)) Adjust the phase of the sampling clock of the picture. (000 - 015) (PC (INPUT6)) Toggle change for screen size. NORMAL WIDE Dot by Dot UNDERSCAN Toggle between mute and unmute. Mute. Unmute. * When the screen size is changed automatically using HDMI AUTO WIDE, the current value is not an auto sized value but a value set manually. E 30