Sharp PN-C703B Operation Manual - Page 32

The power LED is flashing., When TEMPERATURE is displayed in the corner of the, screen.

Get Sharp PN-C703B PDF manuals and user guides View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Troubleshooting The power LED is flashing. When "TEMPERATURE" is displayed in the corner of the screen. • To prevent high-temperature-related problems, "TEMPERATURE" is displayed on the screen when the internal temperature of the monitor rises excessively. • If the internal temperature rises further, the monitor automatically enters standby mode. (The power LED flashes green.) • Remove the cause of the excessive temperature rise. - If the monitor enters standby mode due to a rise in temperature, to return to normal display, turn the power switch off and then back on again. The monitor, however, will enter standby mode again if the cause of the temperature rise is not eliminated. (See page 8.) - Check whether the monitor is placed at a location where a quick rise in temperature is likely. Internal temperature rises quickly if the vents on the monitor are blocked. - Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. E 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
32
E
The power LED is flashing.
When “TEMPERATURE” is displayed in the corner of the
screen.
• To prevent high-temperature-related problems,
“TEMPERATURE” is displayed on the screen when the
internal temperature of the monitor rises excessively.
• If the internal temperature rises further, the monitor
automatically enters standby mode. (The power LED
flashes green.)
• Remove the cause of the excessive temperature rise.
- If the monitor enters standby mode due to a rise in
temperature, to return to normal display, turn the power
switch off and then back on again. The monitor, however,
will enter standby mode again if the cause of the
temperature rise is not eliminated. (See page 8.)
- Check whether the monitor is placed at a location where
a quick rise in temperature is likely. Internal temperature
rises quickly if the vents on the monitor are blocked.
- Internal temperature rises quickly if dust accumulates
inside the monitor or around the vents. Remove dust if
possible. Ask SHARP dealer about removing internal dust.
Troubleshooting