Sharp PN-CD701 Setup Manual - Page 11

ENGLISH Mounting an IoT sensor hub It is possible to mount an IoT sensor hub in the following position. IoT sensor hub mounting bracket 1 2 * 1. Attach the supplied IoT sensor hub mounting brackets (L/R) to the IoT sensor hub with the supplied IoT sensor hub screws (M3) (x2). 2. Fix the IoT sensor hub mounting brackets (L/R) to this monitor with supplied knurled screws (M3) (x2). * T he IoT sensor hub mounting brackets fit into the recess of this monitor. Micro USB cable Mounting a camera It is possible to mount a camera in the following position. 1. Attach the supplied camera with the supplied knurled screws (M3) (x2). The camera can be tilted downward. S/PDIF cable (supplied) USB A to B cable (supplied) 3.5 mm mini jack to USB A cable (supplied) TIPS • The cable clamp (supplied) can be used to clamp the 3.5 mm mini jack to USB A cable (supplied). • Attach the supplied cable clamp to a flat surface. Do not attach over a vent. • Remove any dust or dirt before attaching. 7E