Sharp PN-R903 Operation Manual - Page 29

Menu Items nDual screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors PbyP2 Main screen Sub screen Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * The following combinations are available for display: DisplayPort - HDMI1 or HDMI2 DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - D-SUB[VIDEO] DVI-I - HDMI1 or HDMI2 DVI-I - D-SUB[COMPONENT] DVI-I - D-SUB[VIDEO] TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the INPUT SELECT options cannot be set. • When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. Horizontal direction: 3 monitors Vertical direction: 2 monitors Setting procedure Set using MULTI in the MULTI/PIP menu. 1. Set ENLARGE to ON. 2. Select ADVANCED (ENLARGE). 3. Set the number of monitors aligned in the horizontal direction in ENLARGE H. 4. Set the number of monitors aligned in the vertical direction in ENLARGE V. 5. Set the section of the separated image to be displayed on each monitor in ENLARGE-POS. 1) Press . ENTER 2) Press , , or to select position, then press . MENU TIPS • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the AUTO INPUT CHANGE function is disabled. • When Enlarge is used, the HDMI AUTO VIEW function is disabled. nZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OTHERS menu to ON and then select ZOOM2 in the SIZE setting. This displays the area inside the black band. Laptop computer Corresponding signal*1 resolution 1280x800 1280x1024, 1280x960, 1400x1050*2 1280x600 1280x720 1024x600 1024x768 *1: This setting is effective only when the screen resolution, including the black band, is one of the resolutions listed above. *2: U se the automatic screen adjustment. 29 E