Sharp PN-V601A Operation Manual - Page 14
SCHEDULE, Menu Items, Press, to select the SCHEDULE number, and, Set the SCHEDULE., POWER
View all Sharp PN-V601A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with "SCHEDULE" in the OPTION menu. (See page 11.) SCHEDULE XXXX/XX/XX XXX XX:XX:XX PC D-SUB No. (1) POWER (2) DAY OF THE WEEK (3) TIME (4) INPUT (5) Caution • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 11.) SCHEDULE does not function unless the date and time are specified. • Check regularly that the set date and time are correct. • When STANDBY MODE is LOW POWER, SCHEDULE cannot be set. 1366x768 V: 60 Hz H: 47.7 kHz OK...[MENU] TIPS • Up to 8 SCHEDULE items can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap. 1. Press or to select the SCHEDULE number, and press . 2. Set the SCHEDULE. (See the description below.) Press or to select items, and press or to change the setting. 3. Press . MENU SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to execute the SCHEDULE. ONLY ONCE: Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE. EVERY WEEK: Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the SCHEDULE. Periodic setting such as "Monday through Friday" is also possible. EVERY DAY: Executes the SCHEDULE every day regardless of the day of the week. (4) TIME Specifies the time to execute the SCHEDULE. Set the time on a 24-hour basis. (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on DVI, HDMI and BNC depend on INPUT SELECT settings. E 14