Sharp PW E550 PWE550 Operation Manual - Page 4
Getting Started
![]() |
UPC - 074000017818
View all Sharp PW E550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Getting Started Using the PW-E550 for the first time Be sure to perform the following operations before using the PW-E550 for the first time. 1. Set the battery replacement switch on the bottom of the unit to the 'REPLACE BATTERY' position. 2. Remove the battery cover. 3. Insert the battery. Make sure the battery polarity is correct. 4. Replace the battery cover. 5. Set the battery replacement switch to the 'NORMAL OPERATION' position. 6. Open the unit and press o to turn the power on. The LCD contrast screen will appear. • Should a different screen appear, follow the reset procedure on page 29. • If the power cannot be turned on: • Make sure the battery replacement switch is placed at the 'NORMAL OPERATION' position, then press o again. • If the power still cannot be switched on, try following steps 1 through 6 in the above procedure again. 7. Adjust the LCD contrast by using [ ], and press e. The key sound on/off screen will appear. 8. Select Y or N to turn the key sound on/off. The main menu screen will appear. • The LCD contrast and the key sound settings can be adjusted later in the Set-up menu. 2
![](/manual_guide/products/sharp-pw-e550-pwe550-operation-manual-f70a099/4.png)