Sharp QS2770H QS-1760H, QS-2760H, QS-2770H Operation Manual - Page 6

Note: • A maximum of 4 digits can be stored (decimal point is not counted as a digit). • Be sure to set this selector to the "•" position after storing an each rate. • Only one rate can be stored. If you enter a new rate, the previous rate will be cleared. ADD MODE SELECTOR: "A/+" position - Effective only in addition and subtraction: Use of the A/+ mode permits addition and subtraction of numbers without an entry of the decimal point. When the A/+ mode is activated, the decimal point is automatically positioned according to the decimal selector setting. EXAMPLES: Set A/+- • -A/x to A/+ A. Set decimal to 2 Enter 123456 B. Set decimal to 3 Enter 123456 Tape prints Tape prints 1,234.56 + 123.456 + Use of the , , and keys will automatically override the Add mode and decimally correct answers will be printed at the preset decimal position. EXAMPLES: Set A/+- • -A/x to A/+, 5/4 A. Set decimal to 2 Enter .1234 100 Tape prints B. Set decimal to 3 Enter 2 3 Tape prints C. Set decimal to 2 Enter 123 10 Tape prints 0.1234 × 100. = 12.34 2. ÷ 3. = 0.667 1.23 + 10.00 + 11.23 ➝ Note that decimal point was entered. "A/x" position - Multiplication and division: When the A/x mode is activated, the number entered before or key will override the add mode. But the - 4 -