Sharp QS2770H QS-1760H, QS-2760H, QS-2770H Operation Manual - Page 7
Addition and subtraction, ITEM COUNT MODE SELECTOR - calculator
UPC - 074000017160
View all Sharp QS2770H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
number entered following or key and before (or , , , , ) key will obey the decimal setting. This is useful for invoicing. EXAMPLE: Set A/+- • -A/x to A/x Set decimal to 2 Enter 7 3 Tape prints 7. × 0.03 = 0.21 Note: Use of the key will automatically override the A/x mode. "•" position: Addition and subtraction: The A/x mode functions same as the A/+ mode. Neutral ITEM COUNT MODE SELECTOR: "IC±" position: 1) The counter will count the number of times that the key has been pressed in addition. Note: • Each time the key is used in subtraction, 1 will be subtracted from the count. • The count is printed when the calculated result is obtained. • Pressing of the , , , or key clears the counter. 2) When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the key. 3) The memory item counter will count the number of times that the key has been pressed in the addition. Note: • Each time the key is used in the subtraction, 1 will be subtracted from the count. • The count is printed when the memory is recalled. • Pressing of the key clears the counter. "IC+" position: 1) The counter will count the number of times that the or has been pressed in addition and subtraction. Note: • The count is printed when the calculated result is obtained. - 5 -