Sharp QS2770H QS-1760H, QS-2760H, QS-2770H Operation Manual - Page 9

" " position: An answer is rounded down. EXAMPLE: 10.005 ÷ 5 = 2.001 Set decimal to 2, 10.005 5 → 2.01 Set decimal to 2, 5/4 10.005 5 → 2.00 Note: The decimal point floats during successive calculation by the use of or key. In floating decimal point system, an answer is rounded down. DECIMAL SELECTOR: Presets the number of decimal places in the answer. In the "F" position, the answer is displayed in the floating decimal system. PAPER FEED KEY: When pressed, advances the paper roll. Note: You can also pull the paper manually. RIGHT SHIFT KEY: Operation of this key in entered numbers or calculated results shifts the number one digit to the right together with the decimal point. Used for one digit correction. GRAND TOTAL KEY: Prints and clears the "GT" memory contents. NON-ADD/SUBTOTAL KEY: Non-add - When this key is pressed right after an entry of a number in the Print mode, the entry is printed on the left-hand side with the symbol "#". This key is used to print out numbers not subjects to calculation such as code, date, etc. Subtotal - Used to get subtotal(s) of additions and/or subtractions. When pressed following the or key, the subtotal is printed with the symbol "◊" and the calculation may be continued. By pressing this key even in the Non-print mode, the displayed number is printed with the symbol "P". TOTAL KEY: Prints the total of addition and subtraction with the symbol " ". This key also serves as a clear key for the calculation register and resets an error condition. - 7 -