Sharp R-8000G R-8000G Operation Manual - Page 27

Other Convenient Features

Page 27 highlights

OTHER CONVENIENT FEATURES MULTIPLE SEQUENCE COOKING The oven can be programmed for up to 3 cooking sequences. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your oven can do this automatically. Each cooking mode has a maximum cooking time. If the setting time exceeds the maximum time, the display will show an error message. Touch STOP/ CLEAR pad and program again. Read the following table carefully before setting the program. Cooking mode Maximum cooking time Microwave 100 - 60 % 50 - 0 % 20 min. 40 min. Normal Convection 99 min. 99 sec. High Speed Grill High Speed Grill with Micro Speed Grill Speed Grill with Micro 30 min. Speed Bake Speed Roast 99 min. 99 sec. • Suppose you want to cook roast beef for 5 minutes at 100% microwave power and then continue to cook for 30 minutes at 50% microwave power. PROCEDURE 1 Press SELECTA TIME pad. Enter cooking time. For 100 % microwave power, it is not necessary to touch SELECT POWER pad. Press SELECTA TIME pad. 2 Enter cooking time. Touch SELECTA POWER pad 5 times or hold down until the desired power level appears. x 5 3 Touch START pad. AUTOMATIC COOKING TIME ADJUSTMENT The cooking results may vary slightly depending on room temperature, initial food temperature and other factors. You can adjust cooking results as you like. MORE / LESS TIME ADJUSTMENT BEFORE START Should you discover that you like any of the Express Defrost or Automatic Cooking features slightly more done, touch SELECTA POWER pad once before START pad. The display will show "MORE". To increase the cooking time even more, touch SELECTA POWER pad 3 times before START. The display will show "EVEN MORE" Should you discover that you like any of the Express Defrost or Automatic Cooking features slightly less done, touch SELECTA POWER pad twice before START. The display will show "LESS". To decrease the cooking time even more, touch SELECTA POWER pad 4 times before START The display will show "EVEN LESS". EXTEND DURING COOKING MINUTE PLUS can be used to add up to 99 minutes during cooking. Touch MINUTE PLUS pad repeatedly to extend cooking time in multiples of 1 minute. Carefully check the cooking doneness throughout the cooking time. For Express Defrost any of the Automatic Cooking features, up to 10 minutes can be added. EXTEND AT THE COOKING END When you open and close the door after the cooking, the display will show IF EXTRA TIME IS NEEDED, ENTER COOKING TIME, UP TO 9 MINUTES 99 SECONDS for 3 minutes. During this 3 minutes, additional cooking time with the just finished cooking program can be entered. Enter the desired cooking time and touch START pad. You can add up to 9 min. 99 sec. Carefully check the cooking progress. NOTE: 1. More than two Speed Roast sequences cannot be set in one program at a time. 2. Multiple sequence cooking does not apply to Express Defrost or any of the Automatic Cooking features. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

25
AUTOMATIC COOKING
TIME ADJUSTMENT
The cooking results may vary slightly depending on
room temperature, initial food temperature and other
factors. You can adjust cooking results as you like.
MORE / LESS TIME
ADJUSTMENT BEFORE
START
Should you discover that you like any of the Express
Defrost or Automatic Cooking features slightly
more
done,
touch
SELECTA POWER
pad
once
before START pad.
The display will show “MORE”.
To increase the cooking time even more, touch
SELECTA POWER pad 3 times before START.
The display will show “EVEN MORE”
Should you discover that you like any of the Express
Defrost or Automatic Cooking features slightly
less
done,
touch
SELECTA POWER
pad
twice
before
START
.
The display will show “LESS”.
To decrease the cooking time even more, touch
SELECTA POWER pad 4 times before START
The display will show “EVEN LESS”.
OTHER CONVENIENT FEATURES
MULTIPLE SEQUENCE
COOKING
The oven can be programmed for up to 3 cooking se-
quences.
Sometimes cooking directions tell you to start on one
power level and then change to a different power
level. Your oven can do this automatically.
EXTEND AT THE COOKING END
When you open and close the door after the cooking,
the display will show IF EXTRA TIME IS NEEDED, EN-
TER COOKING TIME, UP TO 9 MINUTES 99 SEC-
ONDS for 3 minutes. During this 3 minutes, additional
cooking time with the just finished cooking program can
be entered. Enter the desired cooking time and touch
START
pad. You can add up to 9 min. 99 sec. Carefully
check the cooking progress.
EXTEND DURING COOKING
MINUTE PLUS can be used to add up to 99 minutes
during cooking. Touch MINUTE PLUS pad repeatedly
to extend cooking time in multiples of 1 minute.
Care-
fully check the cooking doneness throughout the cook-
ing time.
For Express Defrost any of the Automatic Cooking fea-
tures, up to 10 minutes can be added.
PROCEDURE
2
Enter cooking time.
1
Press SELECTA TIME
pad.
Touch
SELECTA POWER
pad 5 times or hold down
until the desired power level
appears.
Enter cooking time.
x 5
Press SELECTA TIME
pad.
For 100 % microwave power, it is not
necessary to touch SELECT POWER pad.
Touch
START
pad.
NOTE:
1.
More than two Speed Roast sequences cannot be
set in one program at a time.
2.
Multiple sequence cooking does not apply to Express
Defrost or any of the Automatic Cooking features.
Suppose you want to cook roast beef for 5 minutes
at 100% microwave power and then continue to cook
for 30 minutes at 50% microwave power.
Cooking mode
Maximum cooking time
100 - 60 %
20 min.
50 - 0 %
40 min.
Normal Convection
99 min. 99 sec.
High Speed Grill
High Speed Grill with Micro
Speed Grill
Speed Grill with Micro
Speed Bake
Speed Roast
Microwave
30 min.
99 min. 99 sec.
Each cooking mode has a maximum cooking time.
If the setting time exceeds the maximum time, the
display will show an error message. Touch STOP/
CLEAR pad and program again. Read the following
table carefully before setting the program.
3