Sharp UX 355L UX-355L Operation Manual - Page 138
Line Error, Substitute Reception to Memory, If the, memory becomes full, Loading, Printing Paper
UPC - 074000032903
View all Sharp UX 355L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Messages and Signals LINE ERROR LINE IS IN USE MEMORY IS FULL MEMORY PRINTING NO DATA NO SERVICE NO # STORED OFF HOOK ON HOOK DIAL OUT OF PAPER Transmission or reception was not successful. Press the STOP key to clear the message and then try again. If the error persists, see Line Error on page 130. An extension phone connected to the fax is being used. Do not lift the fax's handset or attempt transmission at this time, as this will interrupt the conversation on the extension phone. The memory is full. This may occur during fax reception if too much data is received before the pages can be printed out. If faxes have been received to memory because printing is not possible (an additional message will indicate the problem), resolve the problem so that printing can continue (see Substitute Reception to Memory on page 80). If you are attempting to transmit from memory, see If the memory becomes full on page 111. The fax is preparing to or printing out a document from memory. This appears if you attempt to search for an automatic dialing number when none have been stored. This appears if you haven't registered with OpenLCR and press the FUNCTION key and 7. You have tried to dial or clear a Rapid Key or Speed Dial number that hasn't been programmed (a full number hasn't been assigned to it). This appears if you forgot to replace the handset after using it to dial and send a fax. Replace the handset or press the STOP key to clear the message. The SPEAKER key has been pressed and the fax machine is waiting for you to dial. You are out of printing paper (or the paper release plate is open). Load paper as explained in Loading Printing Paper on page 22. 136