Sharp UX 355L UX-355L Operation Manual - Page 49
Selecting a long or short call
![]() |
UPC - 074000032903
View all Sharp UX 355L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Setting Up and Using OpenLCR 2. Setting Up OpenLCR Note: The following settings are not required as of the printing of this manual. OpenLCR will inform you through its Web site (www.OpenLCR.com) if the settings become necessary in the future. Selecting a long or short call Before you make a long distance or international phone/fax call, select whether the call will be a long call or a short call. Your fax needs to know whether the call will be long or short to route it for the best rate. 1 Press these keys: The display will show: LCR TABLE SELECT 1=02MIN, 2=04MIN FUNCTION OpenLCR Note: If the display shows TABLE NOT EXIST, you must first download the rate data. 2 Press 1 to select the SHORT TIME setting, or 2 to select the LONG TIME setting. • The initial SHORT TIME setting is 2 minutes, and the initial LONG TIME setting is 4 minutes. If desired, you can change these settings as explained on the following page. SHORT LONG 1 or 2 • The short/long time selection will remain in effect for all calls until you change it. 47
![](/manual_guide/products/sharp-ux-355l-ux355l-operation-manual-367d0d2/49.png)