Sharp UX 355L UX-355L Operation Manual - Page 51
Start/memory, Start, Memory
UPC - 074000032903
View all Sharp UX 355L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Setting Up and Using OpenLCR 2. Setting Up OpenLCR 3 Enter a 2-digit number (01 to 29) for the number of minutes of the SHORT TIME setting. (If the number is less than 10, enter a 0 before the number.) The display will show your selection and then show: LONG TIME 03 Example: 3 minutes ENTER (03-30) 04 4 Enter a 2-digit number for the number of minutes of the LONG TIME setting. (The number must be greater than the SHORT TIME setting and no more than 30.) The display will show your selection. If the settings were changed, it will then show: START: DOWNLOAD STOP: CANCEL 05 Example: 5 minutes Note: If the display shows NO SERVICE, you must first download the rate data. 5 Press the START/MEMORY key to begin receiving the rate data for the new settings. • Your fax calls OpenLCR and receives the data. This lasts one or two minutes. • Note: If you do not press the START/ MEMORY key to receive new data, the settings will revert to their previous state. START/MEMORY 49