Sharp XG-MB70X XG-MB70X Operation Manual - Page 54
Using the Options1 Menu - projector lamp
View all Sharp XG-MB70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the "Options1" Menu You can use the "Options1" menu to enhance the usage for the projector. Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Menu operation Page 42 Example: "Options1" screen menu for INPUT 1 (RGB) mode Setting the Resize Mode Depending on the input signal, you can select the screen image. Menu operation Page 42 Example: "Options1" screen menu for INPUT 1 (RGB) mode Description of Lamp Life Lamp usage condition Remaining lamp life "Life" 100% 5% Operated exclusively Approx. Approx. in Eco mode ( ) 3,000 hours 150 hours Operated exclusively Approx. Approx. in Standard mode ( ) 2,000 hours 100 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The table above indicates rough estimates in the case of using only in each mode shown. • Remaining lamp life changes within the range of the values shown depending on the frequency at which "Eco Mode" is switched to " " (Eco mode) and " " (Standard mode). (See page 52.) • The lamp life may vary depending on the usage condition. Selectable items of Resize Modes • Normal • Dot By Dot* • Border • Stretch *Item when inputting RGB signal through INPUT 1 or INPUT 2 Note • For details of the Resize mode, see pages 36 and 37. • You can also press on the remote control to set the resize mode. (See page 36.) -50