Sharp XG-MB70X XG-MB70X Operation Manual - Page 71
Removing and Installing, the Lamp Unit
View all Sharp XG-MB70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Removing and Installing the Lamp Unit Info • Ensure the lamp unit is removed using the handle. Ensure the glass surface of the lamp unit or the inside of the projector are not touched. • To avoid injury to yourself and damage to the lamp, ensure to carefully follow the steps below. • Do not loosen other screws except for the lamp unit cover and lamp unit. 1 Press on the projector or on the remote control to put the projector into standby mode. • Wait until the cooling fan stops. Warning! • Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burn or injury. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Pressing the tab, remove the lamp unit cover (2). Optional accessory Lamp unit AN-MB70LP STANDBY button AC socket 1 2 Tab Appendix Tab User service screw (for lamp unit cover) -67