Sharp XG-P10XU XGP10XU Operation Manual - Page 40

Useful Features Economy Mode Projector Remote control 1, 5 2, 3, 4 (GUI) On-screen Display On-screen Display (GUI) On-screen Display E-39 These functions allow you to reduce the power consumption when the projector is in standby mode. Monitor Out/RS-232C Off Function This projector consumes power when using a monitor connected to the OUTPUT port for INPUT 1, 2 and a computer connected to the RS-232C port. When not using these ports, "MNTR Out/RS232C" can be set to " " to reduce standby power consumption. Description of Monitor Out/RS-232C Off Standby power for Monitor Out/RS-232C connection turned off. Monitor Out/RS-232C on (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Options". 3 Press ∂/ƒ to select "MNTR Out/RS232C". 4 Press ß/© to select " " or " ". 5 To exit from the GUI, press MENU. CAUTION • Set "MNTR Out/RS232C" to " " when using the Sharp Advanced Presentation Software (supplied). Automatic Power Shutoff Function When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message on the left will appear five minutes before the power is automatically turned off. Description of Automatic Power Shutoff Power automatically shuts off after 15 minutes of no signal input. Automatic Power Shutoff disabled. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Options". 3 Press ∂/ƒ to select "Auto Power Off". 4 Press ß/© to select " " or " ". 5 To exit from the GUI, press MENU. • "Auto Power Off" is factory preset to " ", and "MNTR Out/ RS232C" is factory preset to " ".