Sharp XL-35 Operation Manual - Page 22

XL-35W Recording to a cassette tape Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes. Erase-prevention tabs of cassette tapes: ! When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. Tab for ! To protect the recorded sound, remove the side B tab after recording. Cover the tab hole with the adhesive tape to record on the tape without the tab. Side A Tab for side A " Recording from a CD 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button until "CD STOP" appears on the display. When operating with the remote control, press the CD button. 3 Load the desired disc. 4 Load a cassette into the cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 5 Press the button. Recording will be paused. 6 Press the ( ) button. Tape Recording ! CD playback will start in a few seconds after the tape starts. ! When the playback of the disc is finished, the CD and the cassette will stop automatically. 21 02/11/22 XL_35W_SCA_3.fm