Sharp XL-35 Operation Manual - Page 28
Maintenance - parts
View all Sharp XL-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
XL-35W References " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. " Clearing all the memory (reset) 1 Press the ON/STAND-BY button to enter the power stand-by mode. 2 Unplug the AC power lead from the AC INPUT socket on the unit. 3 Whilst pressing down the MEMORY/ SET button and the button, plug the AC power lead into the AC INPUT socket on the unit. AC INPUT Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. " Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Maintenance " Cleaning the CD pickup lens Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab. " Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: ! Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish. ! Do not apply oil to the inside of the unit. It may cause malfunc- tions. " Cleaning the tape-handling parts ! Dirty heads, capstan or pinch roller can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. ! When cleaning the heads, pinch roller, etc., unplug the unit which contains high voltages. A BC D Erase head Recording/Playback head Capstan Pinch roller ! After long use, the deck's heads and capstan may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. Read the demagnetiser's instructions carefully before use. 27 02/11/22 XL_35W_SCA_3.fm