Sharp XL-35 Operation Manual - Page 26

XL-35W Advanced Features Timer and sleep operation (continued) Enhancing your system " To use timer and sleep operation together Example: To fall asleep and wake to the same radio station You can play back the same source only (the function cannot be switched). 1 Set the sleep time (steps 1 - 2, page 24). 2 Whilst the sleep timer is set, set the desired playback time (steps 4 - 6, pages 23 - 24). The connection lead is not included. Purchase a commercially available lead as shown below. White Red White VCR, DVD, etc. 1.Sleep timer setting 2.Timer playback setting 5 minutes - 3 hours Sleep operation will Timer playback automatically stop. start time Caution: When using the cassette deck, be sure the tape length is long enough to perform both functions. If you want to sleep and wake up listening to a tape, and the length of the tape is shorter than the sleep timer setting, timer playback will not be possible. RCA lead (not supplied) Red To the line output sockets " Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/AUX IN sockets. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the FUNCTION button until "AUX" appears on the display. When operating with the remote control, press the VIDEO/AUX button. 4 Play the VCR, DVD, etc. Note: To prevent noise interference, place this unit away from a television. " To record on a tape from VCR etc. 1 Load a cassette into the cassette compartment with the side to be recorded on facing you. 2 Press the VIDEO/AUX button. 3 Press the button. 4 Press the ( ) button. 5 Play back the VCR etc. 25 02/11/22 XL_35W_SCA_3.fm