Sharp XL-DK255 Service Manual - Page 10
Mechanical Description - parts
UPC - 074000368675
View all Sharp XL-DK255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
XL-DK255 CHAPTER 3. MECHANICAL DESCRIPTION [1] Removing And Reinstalling The Main Parts 1. CHANGER MECHANISM SECTION Perform steps 1, 2, 9 and 10 of the disassembly method to remove the CD changer mechanism. 1.1 How to remove CD Disc (See Fig. 1-4) 1. When CD is at play position (Figure 1), rotate reduction gear C clock-wise as shown in Figure 2 until disc tray is at stock position, then rotate further to eject the disc tray so that CD can be removed from the tray. Reduction gear D Up Down Figure 3 CD Disc Disc Tray Guide Tray Gear up down board CD at play position. CD Disc Mark 1 Mark 3 Mark 5 (DISC 1) (DISC 3) (DISC 5) Mark 2 Mark 4 (DISC 2) (DISC 4) Figure 4 CD at stalk position. Figure 1 Reduction gear C Front Rear Figure 2 2. In another case, if CD mechanism is at tray No.1 play position and to remove CD located in tray No.3, the procedure is as follows: If the gear up down board is located at tray No.1 position, then rotate gear clock-wise until it is at stock postiiton. Rotate reduction gear D clockwise (Figure 3) to move the CD mechanism to tray No.3 position. This is confirmed by checking the gear up down board position by the marking as indicated on the main chassis as shown in Figure 4. 3 - 1