Sharp XL-ES5 XL-ES5 XL-ES50 Operation Manual - Page 15
Setting the clock - xl es50 reset
View all Sharp XL-ES5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting the clock 3 Within 30 seconds, press the PRESET ( or ) button to adjust the hour and then press the MEMORY/SET button. XL-ES5 XL-ES50 Press the PRESET ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. 4 Within 30 seconds, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY/SET button. Basic Operation In this example, the clock is set for the 12-hour (AM 12:00) display. 1 Press the CLOCK button and within 8 seconds, press the MEMORY/SET button. 2 Within 30 seconds, press the PRESET ( or ) button to select 12-hour or 24-hour display and then press the MEMORY/SET button. "AM 12:00" "0:00" The 12-hour display will appear. (AM 12:00 - PM 11:59) The 24-hour display will appear. (0:00 - 23:59) Press the PRESET ( or ) button once to advance the time by 1 minute. Hold it down to advance continuously. To confirm the time display: Press the CLOCK button. The time display will appear for about 8 seconds. Note: The "CLOCK" or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows. To readjust the clock: Perform "Setting the clock" from step 1. If the "CLOCK" is not flashing in step 1, step 2 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 29 for details.] 2 Perform "Setting the clock" from step 1. 15