Sharp XL-HP505 XL-HP505 Operation Manual - Page 17

" Playback will begin from track 1 on the DISC 1. After that disc finishes playing, the next disc will automatically play. " After the last track on the fifth disc is played, the CD player stops automatically. " When there is no CD in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a CD. To exchange other CDs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs. To remove the CDs: In the stop mode, press the 1 - 5 button and within 5 seconds, press the OPEN/CLOSE button. Caution: " Do not place two CDs in one disc tray. " Do not play discs with special shapes (heart- or octagon- shaped). It may cause malfunctions. " Do not push the disc tray while it is moving. " If the power fails while the tray is open, wait until the power is restored. " If the disc tray is stopped with force, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. " If a disc is damaged, dirty, or loaded upside down, the disc will skip. Auto power on function: When you press any of the following buttons, the unit turns on. " CD button (main unit and remote control): The unit turns on and the "CD" function is activated. " CD / button on the remote control: The unit turns on and CD playback starts (regardless of the last function). " / button on the main unit: The unit turns on and playback of the last function starts (CD/TAPE/TUNER/VIDEO). ! Various CD functions Function Play Main unit Remote control Operation Press in the stop mode. Stop Press in the playback mode. Pause Fast forward/Fast reverse Cue/Review Press in the playback mode. Press the / button to resume playback from the paused point. Press in the playback or stop mode. Select the desired track in the stop mode. Playback starts from that track. Press and hold down in the playback mode. Release the button to resume playback. Notes: " Cue/review and fast forward/fast reverse are possible only within individual discs. " When the end of the last track is reached during fast forward, " END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. ( : Last track number) CD Playback XL-HP505 17