Sharp XL-HP505 XL-HP505 Operation Manual - Page 35

Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ! General Power source Power consumption Dimensions Weight AC 120 V, 60 Hz 80 W Width: 7-1/4" (185 mm) Height: 10-1/4" (260 mm) Depth: 12" (307 mm) 13.7 lbs. (6.2 kg) ! Amplifier Output power Output terminals Input terminals 75 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10% total harmonic distortion Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 200 mV/ 10 k ohms at 70 Hz Video/Auxiliary (audio signal): 500 mV/47 k ohms ! CD player Type Signal readout D/A converter Frequency response Dynamic range 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) ! Tuner Frequency range FM: 87.5 - 108 MHz AM: 530 - 1,720 kHz ! Cassette deck Frequency response Signal/noise ratio Wow and flutter 50 - 14,000 Hz (normal tape) 50 dB (recording/playback) 0.3 % (WRMS) ! Speaker Type Maximum input power Rated input power Impedance Dimensions Weight 2-way type speaker system 2" (5 cm) tweeter 5-1/8" (13 cm) woofer 150 W 75 W 6 ohms Width: 6-1/2" (165 mm) Height: 10-1/4" (261 mm) Depth: 9-11/16" (246 mm) 6.2 lbs. (2.8 kg)/each References XL-HP505 35