Sharp XL-HP505 XL-HP505 Operation Manual - Page 26
Recording on a cassette tape continued
![]() |
View all Sharp XL-HP505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
XL-HP505 Recording on a cassette tape (continued) Tape Recording Recording from several CDs continuously: 1 Perform steps 1 - 6 in "Recording from a CD (CDs)" on page 25. 2 Within 5 seconds, press the / ( ) button to record on side A, or the button for side B. To perform programmed recording: 1 Program discs and tracks. (See page 20.) 2 Press the button. 3 Press the / ( ) button to record on side A, or the side B. button for To stop recording: Press the (TAPE ) button. The CD and tape will stop. Auto restart function: If the recording side is switched from side A to B during recording, the system will record the interrupted track on side B from its beginning. The recording will be made without cutting the beginning of the track on side B. ! Recording from the radio 1 Tune in to the desired station. (See page 21.) 2 Load a cassette into the cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the button to choose one side or both sides. ... To record on both sides. ... To record on only one side. 4 Press the button. Recording will be paused. 5 Press the / ( ) button to record on side A, or the but- ton for side B. To record on both sides, begin with side A. (If recording is started from side B, the tape will not switch over to side A.) To interrupt recording: Press the button. To resume recording, press the same recording button you pressed in step 5. Other buttons do not allow resuming. To stop recording: Press the (TAPE ) button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. ! Erasing recorded tapes 1 Press the TAPE button. 2 Follow steps 2 - 5 in "Recording from the radio". 26
![](/manual_guide/products/sharp-xlhp505-xlhp505-operation-manual-6168de9/26.png)