Sharp XV-Z3000 XV-Z3000 Operation Manual - Page 10
Caution regarding usage of the projector, Other connected equipment - manual
UPC - 074000364820
View all Sharp XV-Z3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Introduction I When turning off the projector, the cooling fan runs to decrease the internal temperature for a while. Unplug the power cord after the cooling fan stops. The period the cooling fan runs will vary, depending on the circumstances and the internal temperature. Caution regarding usage of the projector I When using the projector, be sure not to sub- ject it to hard impact and/or vibration, as this can result in damage. Take extra care with the lens. Before moving the projector, be sure to unplug the power cord from the wall outlet, and disconnect any other cables connected to it. I Do not carry the projector by holding the lens. I When storing the projector, re-attach the lens cap. (See page 11). I Do not expose the projector to direct sunlight or place next to heat sources. Doing so may affect the cabinet color or cause deformation of the plastic cover. Other connected equipment I When connecting a computer or other audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries I The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, be sure to use an appropriate power cord for the country you are in. Temperature monitor function I If the projector starts to overheat due to setup problems or blockage of the air vents, " " and " " will illuminate in the lower left corner of the picture. If the temperature continues to rise, the lamp will turn off, the temperature warn- ing indicator on the projector will blink, and after a 90-second cooling-off period the projector will enter standby mode. Refer to "Maintenance In- dicators" on page 52 for details. Info • The cooling fan regulates the internal temperature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunction. • Do not unplug the power cord during projection or cooling fan operation. This can cause damage due to rise in internal temperature, as the cooling fan also stops. 9