Sharp XV-Z3000 XV-Z3000 Operation Manual - Page 28
Controlling the Projector by a Computer
UPC - 074000364820
View all Sharp XV-Z3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS232C adaptor (optional accessory: AN-A1RS) and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 58 for detail. When connecting to a computer using an RS-232C serial control cable and a DIN- D-sub RS-232C adaptor To RS-232C terminal Computer To RS-232C terminal DIN-D-sub RS-232C adaptor (optional accessory: AN-A1RS) RS-232C serial control cable (cross type, commercially available) Note • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See page 58 for connection of an RS-232C serial control cable. Info • Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer. Connections 27