Sharp XVZ12000U Operation Manual - Page 23
Connecting the Projector to a Computer - sharpvision projector
UPC - 074000364028
View all Sharp XVZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting the Projector to Other Devices Connecting the Projector to a Computer Connecting to a Computer Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 5) 1 Connect a DVI to 15-pin D-sub adaptor to the projector. 2 Connect the above adaptor to an RGB cable. 3 Connect the above cable to the computer. • Secure the connectors by tightening the thumbscrews. Optional accessory To INPUT 5 terminal DVI to 15-pin D-sub adaptor Type: AN-A1DV (7.9" (20 cm)) Note • See "Computer Compatibility Chart" on page 88 for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • When connecting the projector to a computer in this way, select "A. RGB" for "Signal Type" in the "Options" menu, or select the "A. RGB" by pressing on the remote control. See page 69. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Authorized SharpVision Service Center or Dealer. • Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual for switching the computer signal output settings. DVI to 15-pin D-sub (sold separately) adaptor RGB Cable (commercially available) To RGB output terminal Notebook computer -22 XV_Z12000_E_US_p15_26.p65 22 03.9.26, 6:37 PM