Sharp XVZ12000U Operation Manual - Page 33
Projection from behind the screen, Projection using a mirror, Ceiling-mount setup
UPC - 074000364028
View all Sharp XVZ12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setup Projecting a Reversed/Inverted Image Projection from behind the screen I Place a translucent screen between the projector and the audience. I Reverse the image by setting "Rear" for "PRJ Mode" in the "Options" menu. See page 73 for use of this function. When using the default setting. MOn-screen Display Projection using a mirror I Place a mirror (normal flat type) in front of the lens. The image is reversed. Info • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately). (ANCM250 ceiling-mount bracket, AN-EP101B extension tube for AN-CM250.) I Be sure to adjust the position of the projector to match the distance (z) from the lens center position (see page 31) to the lower edge of the image, when mounting the projector on the ceiling. I Invert the image by setting "Ceiling + Front" for "PRJ Mode" in the "Options" menu. See page 73 for use of this function. When using the default setting. MOn-screen Display The image is inverted. -32 XV_Z12000_E_US_p27_32.p65 32 03.9.24, 1:58 PM