Singer 1 One Instruction Manual 27 - Page 119
Looper as illustrated 1-10.
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
7. Thread the hole in the Upper Looper from front to back . Pull about 4 inches of thread through the looper and place to the back of the throat plate. Thread Lower Looper with regular overlock thread. 1. Raise the Presser Foot to release the Tension disks. Thread the Lower Looper as illustrated 1-10. 2. Pass thread from back to the front through the thread guide . Four-Thread Ultra-Stretch Mock Safety Stitch page 9
7. Thread the hole in the Upper Looper from front to back
k
.
Pull about 4
inches of thread through the looper and place to the back of the
throat plate.
±
Thread Lower Looper with regular overlock thread.
1. Raise the Presser Foot to release the Tension disks.
Thread the Lower
Looper as illustrated 1-10.
2. Pass thread from back to the front through the thread guide
c
.
Four-Thread Ultra-Stretch Mock Safety Stitch page 9