Singer 1 One Instruction Manual 27 - Page 71
While holding the thread, firmly pull the thread between the tension disks.
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Thread Lower Looper with decorative overlock thread. 1. Raise the Presser Foot to release the tension disks. Thread the Lower Looper as illustrated 1-10. 2. Pass thread from back to the front through the thread guide . 3. Thread the top cover thread guide by pulling the thread towards the left until it slips under the guide. Then pull the thread along the right side of the button as illustrated. 4. While holding the thread, firmly pull the thread between the tension disks. 5. Turn the handwheel toward you until the lower looper extends 5-10mm (approximately ½ inch) from the needle plate edge. Three-Thread Overlock (wide-decorative) page 5
±
Thread Lower Looper with decorative overlock thread.
1. Raise the Presser Foot to release the tension disks.
Thread the Lower
Looper as illustrated 1-10.
2. Pass thread from back to the front
through the thread guide
c
.
3. Thread the top cover thread guide by pulling the thread towards the left until
it slips under the guide.
Then pull the thread along the right side of the
button as illustrated.
4. While holding the thread, firmly pull the thread between the tension disks.
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½ inch) from the needle plate edge.
Three-Thread Overlock (wide-decorative) page 5