Singer 1 One Instruction Manual 27 - Page 70
Pull about 4
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5. Turn the handwheel toward you until the lower looper extends 5-10mm (approximately ½ inch) from the needle plate edge. 6. Thread the looper area of the machine following the green color coded thread guides 4-9. 7. Thread the hole in the Upper Looper from front to back . Pull about 4 inches of thread through the looper and place to the back of the throat plate. Three-Thread Overlock (wide-decorative) page 4
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½ inch) from the needle plate edge.
6. Thread the looper area of the machine following the green color coded
thread guides 4-9.
7. Thread the hole in the Upper Looper from front to back
k
.
Pull about 4
inches of thread through the looper and place to the back of the
throat plate.
Three-Thread Overlock (wide-decorative) page 4