Singer 14J250 Stylist II Serger Instruction Manual - Page 27

Needle Threader

Get Singer 14J250 Stylist II Serger PDF manuals and user guides View all Singer 14J250 Stylist II Serger manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

NEEDLE THREADER 1. Feed the thread through the thread guide of needle clamp as illustrated. Raise the presser foot. Raise the needle bar to highest position, and pull the thread leaving about 4" (10 cm) clear. 2. Lower the presser foot. Set the needle threader ensuring the hooking fork enters into the needle hole. 3. Hold the thread with the needle threader in one hand. 4. Guide the thread into hooking fork and pull the thread with your other hand. 5. Move the needle threader backwards slightly. Then release the hand which is pulling the thread. 6. Take the needle threader off the needle clamp. 7. Pull the thread toward the back of the machine. For right needle / Pour aiguille droite / Para la aguja derecha For left needle / Pour aiguille gauche / Para la aguja izquierda 26 7 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
26
For right needle / Pour aiguille droite / Para la aguja derecha
For left needle / Pour aiguille gauche / Para la aguja izquierda
NEEDLE THREADER
1. Feed the thread through the thread guide
of needle clamp as illustrated. Raise
the presser foot. Raise the needle bar
to highest position, and pull the thread
leaving about 4” (10 cm) clear.
2. Lower the presser foot. Set the needle
threader ensuring the hooking fork enters
into the needle hole.
3
.
Hold the thread with the needle threader
in one hand.
4
.
Guide the thread into hooking fork and
pull the thread with your other hand.
5. Move the needle threader backwards
slightly. Then release the hand which is
pulling the thread.
6. Take the needle threader off the needle
clamp.
7. Pull the thread toward the back of the
machine.
7
7