Singer 20U-109 Instruction Manual - Page 16
reeding the, bobbin, winding
View all Singer 20U-109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Zigzag Sewing Machine Instruction Manual and Parts List Place bobbin on bobbin winder spindle '3'. Figure 11, pushing it on as far as it will go. Pre tension '1' (see Figure 11) '+' More tension '-' Less tension Push latch '2' in the direction indicated by arrow 'A', then start the machine (see Figure 11). Bobbin winder spindle '3', rotate in the direction indicated by arrow 'B' (see Figure 11). To adjust the amount of thread on bobbin, loosen screw '4' on latch '2' and swing the latch '2' away from you or toward you, as required. For more thread on bobbin, swing latch '2' away from you. For less thread on bobbin, swing latch '2' toward you. If thread winds unevenly on bobbin, loosen screw '5' and move pre-tension '1' up or down, as required, and tighten screw 'S'. • Th reeding the pre-tansion for bobbin winding 2 4 Figure 11 Caution: • Do not guide or hold thread when winding the bobbin. 3.9. Bobbin Case Threading Hold bobbin case so that thread unwinds in the direction shown in Figure 12, and put bobbin in bobbin case. Figure 12 Put thread into notch '1', and draw it under tension spring '2' (see Figure 13) 15 •