Singer 85SCH and 850SCH SCHOLASTIC COMBO Instruction Manual - Page 20
Winding the Bobbin
View all Singer 85SCH and 850SCH SCHOLASTIC COMBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
EN Winding the Bobbin - Place thread and corresponding spool holder on to spool pin. (1/2) - Snap thread into thread guide. (3) - Wind thread clockwise around bobbin winder tension discs. (4) - Thread bobbin as illustrated and place on spindle. (5) - Push bobbin spindle to right. (6) - Hold thread end securily. (7) 1 - Step on foot control pedal. (8) - Trim thread close to the bobbin & then continue winding until bobbin is full. (9) 2 - Cut thread, push bobbin spindle to left (10) and remove. Please Note: When the bobbin winder spindle is in "bobbin winding" position, the machine will not sew and the handwheel turn. To start sewing, push the bobbin winder spindle to the left 4 (sewing position). 3 5 6 7 8 9 10 12
Winding the Bobbin
EN
12
- Place thread and corresponding spool holder on to spool
pin. (1/2)
- Snap thread into thread guide. (3)
- Wind thread clockwise around bobbin winder tension discs. (4)
- Thread bobbin as illustrated and place on spindle. (5)
- Push bobbin spindle to right. (6)
- Hold thread end securily. (7)
- Step on foot control pedal. (8)
- Trim thread close to the bobbin & then continue winding
until bobbin is full. (9)
- Cut thread, push bobbin spindle to left (10) and remove.
When the bobbin winder spindle is in "bobbin winding"
position, the machine will not sew and the
.
To start sewing, push the bobbin winder spindle to the left
(sewing position).
Please Note:
handwheel turn
1
2
4
7
8
9
5
6
3
10