Singer 85SCH and 850SCH SCHOLASTIC COMBO Instruction Manual - Page 44

EN Blind Hem For hems on curtains, trousers, skirts, etc. Blind hem for stretch fabrics. Blind hem for firm fabrics. M Set the stitch length dial with the range shown on the diagram at the right. Blind hems, however, are normally sewn with a longer stitch length setting. Set the stitch width dial at a setting appropriate for the weight/type of fabric being sewn, within the range shown in the diagram on the right of the page. Generally, a narrower stitch is used for lighter weight fabrics, and a wider stitch is used for heavier weight fabrics. Sew a test first to make sure the machine settings are appropriate for the fabric. Blind Hem: Turn up the hem to the desired width and press. Fold back (as shown in Fig. 1) against the right side of the fabric with the top edge of the hem extending about 7 mm (1/4") to the right side of the folded fabric. 1 Start to sew slowly along the fold, so that the needle drops through the edge of the fold. (2) Unfold the fabric when hemming is completed and press. Note: 2 To make blind hem sewing even easier, use a blind hem foot, available from your SINGER® retailer. (See page 10 for part number) 36