Singer 8763 Curvy Instruction Manual - Page 20

USING AUTOMATIC NEEDLE THREADER *Be sure to raise the presser foot lifter and raise the needle to its highest position before threading. NOTE: For smooth threading, it is recommended that the machine be set for straight stitch (in center needle position) when using the automatic needle threader. 1. Hook thread to the thread guide on the needle bar and pull it toward you leaving about 4" (10 cm) clear. 2. Hook thread to the twin thread guide (A and B). 3. Pull thread gently into the thread cutter/holder to cut and hold it in place. NOTE: Don't pull thread with strong force or thread may be pulled off from needle hole after threading. 4. Pull down the threading lever until the twin thread guide rotates and stops. NOTE: Make sure that the guide doesn't touch fabric, etc. 5. Release the threading lever and needle will be threaded automatically. If it should not return to the original position, raise it gently by hand. 6. Pull thread loop away from you. 1 Felt disc Rondelle de feutre Disco de fieltro Thread guide Guide-fil Guía hilo 2 Twin thread guide Guide-fil double Guía doble hilo Note: 1. Heavy thread cannot be threaded through fine needle. 2. Don't lower the threading lever while the machine is in operation or the threading hook may be broken. 3. Put a drop of sewing machine oil onto the felt disc, if the machine is used after a long interval. 4. If the threading hook is deviated from needle hole, adjust the position of the hook. 3 Threading hook Crochet d'enfilage Gancho del ensartador A B 4 5 Threading lever Releveur de fil Palanca de ensartado Thread cutter/holder Coupe-fil / support Cortador de hilo 6 20