Singer Futura Quartet SEQS-6700 Instruction Manual - Page 62
Cording Foot
View all Singer Futura Quartet SEQS-6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
CORDING FOOT Sew over one, two or three standards of cord to embellish used for cording. Single cording 1. Mark the design on the fabric. Insert the cord in the center groove of the cording foot from the right side opening. Pull the cord about 5cm (2 inches) behind the foot. 2. The grooves of the foot will hold the length of the cord in place while the stitches are being formed over the cord. 3. Select the stitch and adjust the stitch width so that the stitches are just covering the cord. Lower the foot and sew slowly, guiding the cord over the design. 03 * The cording foot is an optional accessory. Triple cording 1. Push the sewing thread to the left and insert three cords into the grooves of the foot and pull out 5cm (2 inches) of the cords behind the foot. Select the desired pattern and adjust the stitch width so that the stitches are just covering the cords. Lower the foot and sew slowly guiding the cords. 07 10 * The cording foot is an optional accessory. 60