Singer Futura Quartet SEQS-6700 Instruction Manual - Page 7

Winding Bobbin

Get Singer Futura Quartet SEQS-6700 PDF manuals and user guides View all Singer Futura Quartet SEQS-6700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

WINDING BOBBIN Be sure to use Class 15 J bobbins. 1. Place a spool of thread on the spool pin, and secure it with the spool pin cap. Pull the thread out from the spool and place it through thread guides as shown in illustration. 1 2. Put end of thread through the hole in bobbin as shown. 2 Place bobbin onto the bobbin winder spindle as far as it can go. 3. Holding onto the end of the thread, push the bobbin winder latch against the bobbin until it clicks and bobbin starts to 3 rotate. 4. Bobbin will disengage automatically and the winding 4 mechanism will stop when the bobbin is full. To stop the bobbin winding at any time during the winding process, push the Start/Stop button and move the bobbin winder latch to the right. Remove the wound bobbin and cut the thread tail. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
5
WINDING BOBBIN
1. Place a spool of thread on the spool pin, and secure it with
the spool pin cap. Pull the thread out from the spool and
place it through thread guides as shown in illustration.
2. Put end of thread through the hole in bobbin as shown.
Place bobbin onto the bobbin winder spindle as far as it
can go.
3. Holding onto the end of the thread, push the bobbin winder
latch against the bobbin until it clicks and bobbin starts to
rotate.
4. Bobbin will disengage automatically and the winding
mechanism will stop when the bobbin is full.
To stop the bobbin winding at any time during the winding
process, push the Start/Stop button and move the bobbin
winder latch to the right. Remove the wound bobbin and
cut the thread tail.
Be sure to use Class 15 J bobbins.
1
2
3
4