Singer H74 Instruction Manual 2 - Page 62

Walking Foot - sewing machine accessories

Get Singer H74 PDF manuals and user guides View all Singer H74 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

WALKING FOOT 1 Please Note: Always try to sew first without the walking foot accessory which should be used only when necessary. It is easier to guide the fabric and you have a better view of the seam when using the standard, regular foot on your machine. Your sewing machine offers excellent stitch quality 1 on a wide range of fabrics from delicate chiffons to multiple layers of denim. The Walking foot attachment equalizes the feeding of the fabric layers. It improves the matching of plaids, stripes and patterns. It also helps to prevent uneven feeding of difficult or napped fabrics, such as velvet or corduroy. 11 Lift the presser foot lifter to raise the 2 presser foot bar. a b 22 Remove the presser foot holder by unscrewing (counterclockwise) the presser bar attaching screw. 33 Attach the Walking foot to the machine as c follows: - The arm (a) should fit into above the needle screw and clamp (b). 3 - Slide the attaching head (c) from left to right, so that it is fitted onto the presser foot bar. - Lower the presser foot bar. - Replace and tighten (clockwise) the presser bar attaching screw. - Make sure both the needle screw and the presser bar attaching screw are tightly secured. 44 Draw the bobbin thread up and place both 4 the bobbin thread and the needle thread behind the walking foot attachment. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Please
Note:
Always
try
to
sew
first
without the walking foot accessory which
should be used only when necessary.
It is easier to guide the fabric and you have a
better
view
of
the
seam
when
using
the
standard, regular foot on your machine. Your
sewing machine offers excellent stitch quality
on a wide range of fabrics from delicate
chiffons to multiple layers of denim.
The Walking foot attachment equalizes the
feeding of the fabric layers. It improves the
matching of plaids, stripes and patterns. It
also
helps
to
prevent
uneven
feeding
of
difficult or napped fabrics, such as velvet or
corduroy.
1 Lift
the
presser
foot
lifter
to
raise
the
presser foot bar.
2 Remove
the
presser
foot
holder
by
unscrewing (counterclockwise) the presser
bar attaching screw.
3 Attach the Walking foot to the machine as
follows:
- The arm (a) should fit into above the
needle screw and clamp (b).
- Slide the attaching head (c) from left to
right, so that it is fitted onto the presser
foot bar.
- Lower the presser foot bar.
- Replace
and
tighten
(clockwise)
the
presser bar attaching screw.
- Make sure both the needle screw and the
presser bar attaching screw are tightly
secured.
4 Draw the bobbin thread up and place both
the bobbin thread and the needle thread
behind the walking foot attachment.
2
3
4
1
1
WALKING FOOT
57
c
a
b
4
2
3
1