Singer Quantum Stylist 9960 Instruction Manual 2 - Page 82

Using The Even-feed, Continuous, Decorative Pattern

Get Singer Quantum Stylist 9960 PDF manuals and user guides View all Singer Quantum Stylist 9960 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

CONTINUOUS DECORATIVE PATTERN Use the satin foot for continuous decorative stitch patterns. This foot has a full indentation on the underside to easily allow closely spaced zigzag stitches and fabric to feed freely under foot. No. 19-100 Satin foot (B) To tailor the continuous decorative stitch pattern, you may adjust the length and width of pattern. Also you may change reverse or mirror stitch of pattern and elongate the pattern. Experiment with fabric scraps until you get the desired length and width. A. SEWING THIN FABRICS When sewing thin fabrics, it is suggested that you use stabilizer on the backside of the fabric. USING THE EVEN-FEED FOOT The Even-feed foot accessory equalizes the feeding of the upper and lower layers of fabric and improves the matching of plaids, stripes, and patterns. This foot helps to prevent uneven feeding of very difficult fabrics. No. 1, 2, or 9 Even-feed foot A. ATTACHING THE EVEN-FEED FOOT 1. Remove the presser foot and holder. (See page 14) 2. The arm of even-feed foot should ride onto the shaft of the needle clamp screw. 3. Slide the attaching head from your left to right so that it is fitted into the presser bar. 4. Tighten the presser foot thumb screw. B. SEWING Hold both thread lightly at start of sewing and sew in slow (1/2) speed. 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
82
USING THE EVEN-FEED
FOOT
The Even-feed foot accessory equalizes the
feeding of the upper and lower layers of fabric and
improves the matching of plaids, stripes, and
patterns. This foot helps to prevent uneven
feeding of very difficult fabrics.
No. 1, 2, or 9
Even-feed foot
A.ATTACHING THE EVEN-FEED FOOT
1.
Remove the presser foot and holder. (See page
14)
2.
The arm of even-feed foot should ride onto the
shaft of the needle clamp screw.
3.
Slide the attaching head from your left to right
so that it is fitted into the presser bar.
4.
Tighten the presser foot thumb screw.
B.SEWING
Hold both thread lightly at start of sewing and sew
in slow (1/2) speed.
CONTINUOUS
DECORATIVE PATTERN
Use the satin foot for continuous decorative stitch
patterns.
This foot has a full indentation on the underside to
easily allow closely spaced zigzag stitches and
fabric to feed freely under foot.
No. 19-100
Satin foot (B)
To tailor the continuous decorative stitch pattern,
you may adjust the length and width of pattern.
Also you may change reverse or mirror stitch of
pattern and elongate the pattern.
Experiment with fabric scraps until you get the
desired length and width.
A.SEWING THIN FABRICS
When sewing thin fabrics, it is suggested that you
use stabilizer on the backside of the fabric.