Singer S16 I Studio Instruction Manual - Page 10

Winding a Bobbin x w q z Stopper c e y r t v u i b n Pull the thread guide bar up as far as it will go. Stoppers will click when fully extended. q Thread guides w Bobbin winding tension disk e Bobbin hole r Notch t Spring y Bobbin winder spindle u Bobbin winder lever/stopper Step z Pass the thread through the thread guides q from behind. Step x Pass the thread under the bobbin winding tension disk clockwise. w. Step c Thread through the hole e in the bobbin from the inside to the outside. Match the notch r with the spring t on the bobbin winder spindle. Then insert the bobbin on the bobbin winder spindle y. Step v Push the bobbin winder lever/stopper to the left u. Step b Hold the free end of the thread in your hand and press the bobbin winding button i. Press the bobbin winding button again to stop the bobbin when it has made several turns, and cut the thread close to the hole on top of the bobbin. Step n Press the bobbin winding button again. When the bobbin is fully wound, the machine will stop automatically. Return the bobbin winder lever/stopper to its original position. Cut the thread with a scissors. Remove the bobbin from the bobbin winder spindle. This machine has an independent motor for bobbin winding. Bobbins can be wound while sewing. 10