Singer S16 I Studio Instruction Manual - Page 7
Up/Down Needle Position Button, Bobbin Winding Button, Thread Cutter Button, Stitch Length
View all Singer S16 I Studio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Up/Down Needle Position Button RED LED GREEN LED Bobbin Winding Button LED Thread Cutter Button Stitch Length Adjustment Dial 3 q Press this button to bring the needle up or down. The RED LED will light up when the needle is down. The GREEN LED will light up when the needle is up. The machine will stop with the needle up or down depending on the needle position determined by this button. The machine will always stop with the needle up after auto thread cutting or buttonhole sewing. Press this button to wind the bobbin. The LED will light up when you shift the bobbin winding lever toward the bobbin and press this button. The LED signal will turn off after bobbin winding is finished. Pressing this button after sewing will trim the threads. You can continue sewing without pulling the bobbin thread up after using thread cutter. • Use the thread cutter on the face cover if the thread is heavier than #30. • The foot control and up/down needle position button cannot be used while the machine is trimming the threads. You can adjust the stitch length from 0 to 6mm by turning this dial. The stitch length chosen will be shown on the stitch length display q. Reverse Stitch Lever The machine will sew in reverse while the reverse stitch lever is pressed down. The machine will sew forward when the lever is released. Use the reverse stitch lever to secure the beginning and end of a seam. 7