Singer SE300 Legacy Instruction Manual and Troubleshooting Guide - Page 17
Hreading, Achine
View all Singer SE300 Legacy manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SETTING UP THE MACHINE THREADING THE MACHINE BOBBIN SETTING %HVXUHWRXVHRQO\6,1*(5&ODVVEREELQVWUDQVSDUHQW LQ this machine. REMOVING THE BOBBIN 1. Pull the bobbin cover latch to the right and remove the bobbin cover. 2. Lift up the bobbin from the machine. WINDING THE BOBBIN 1. Hold thread in both hands and hook thread to the guide from front opening. 2. Bring thread to the right and pass it through the thread guide from the back side. Pass thread under the bobbin winding tension disk in a clockwise direction. 3. Insert thread through hole in bobbin and place the bobbin on bobbin winder spindle. SETTING SPOOL OF THREAD ON SPOOL PIN 1. Pull up the left end of spool pin and set the felt washer and the spool of thread on spool pin so that the thread unrolls from the front of the spool. 6HWWKHVSRROFDSRQVSRROSLQDVIDUDVLWZLOOJR a. Reverse spool cap direction according to the size of spool. b. Use the small spool cap when you use cross wound thread. Leave small opening between cap and spool as illustrated. c. 6HWWKHWKUHDGQHWRYHUWKHVSRROLIWKUHDGXQUROOVWRR easily. 4. Hold the end of the thread and push bobbin stopper to the right. When the bobbin winding screen appears, press the 6WDUW6WRSEXWWRQRQWKHVFUHHQWRVWDUWZLQGLQJ 5. After the bobbin winds a few turns, stop the machine by SUHVVLQJWKH6WDUW6WRSEXWWRQRQWKHVFUHHQ 6. Cut the thread near the hole, as illustrated. 6WDUWWKHPDFKLQHDJDLQE\SUHVVLQJWKH6WDUW6WRSEXWWRQ RQVFUHHQ