Singer SteamWorks Pro Instruction Manual - Page 10

Removing Mineral Build-Up - how to clean

Page 10 highlights

C l eanin g SINGER recommends cleaning your garment steamer at least once a week. Remove the Water Tank by pulling upward on the handle. • Turn the switch to "Off" and unplug the garment steamer. • Allow the garment steamer to cool for at least 30 minutes. • Remove the Cool Touch Hose. Collapse and remove the Telescopic Pole. • Remove and drain the Water Tank. Rinse it with fresh water and let it drain completely. Place it back on the Water Reservoir. • Drain the water tank by removing the Drain Plug and emptying the contents. • Flush the unit by filling the Water Reservoir and the Hose Connector with fresh water and draining completely. Replace the Drain Plug. • Wrap the hose around the Telescopic Pole once, placing the Steam Head on the Steam Head Hanger to store. Removing Mineral Build-Up It is common for minerals found in hard water to build up inside the steamer, causing intermittent or weak steam. Depending on your water quality, SINGER recommends removing the mineral build-up after the first 1 to 2 weeks of using this steamer. If you do not use de-mineralized or distilled water in your steamer, follow these steps monthly. • Turn the switch to "Off" and unplug the steamer. • Remove the Cool Touch Hose. Collapse and remove the Telescopic Pole. • Drain the Water Reservoir, and empty the water from the Water Tank. • Prepare a solution of 1 cup vinegar and 1 cup water. • Slowly pour the solution into the Hose Connector until the Water Reservoir is about half full, near the top of the hose. • Let the solution stand for about 40 minutes. • Drain the solution by removing the Drain Plug and emptying the solution into a sink or tub. • Drain the solution from the Hose Connector by tilting the unit over a sink or tub and pouring the water out. • Pour clean water into the Hose Connector and Water Reservoir inlet and drain. Repeat this step until the vinegar odor dissipates. • Reassemble the unit. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

10
CLEANING
SINGER recommends cleaning your garment steamer at least once a week.
Remove the Water Tank by pulling upward on the handle.
Turn the switch to “Off” and unplug the garment steamer.
Allow the garment steamer to cool for at least 30 minutes.
Remove the Cool Touch Hose. Collapse and remove the Telescopic Pole.
Remove and drain the Water Tank. Rinse it with fresh water and let it drain
completely. Place it back on the Water Reservoir.
Drain the water tank by removing the Drain Plug and emptying the contents.
Flush the unit by filling the Water Reservoir and the Hose Connector with
fresh water and draining completely. Replace the Drain Plug.
Wrap the hose around the Telescopic Pole once, placing the Steam Head on
the Steam Head Hanger to store.
Removing Mineral Build-Up
It is common for minerals found in hard water to build up inside the steamer,
causing intermittent or weak steam. Depending on your water quality, SINGER
recommends removing the mineral build-up after the first 1 to 2 weeks of using
this steamer. If you do not use de-mineralized or distilled water in your steamer,
follow these steps monthly.
Turn the switch to “Off” and unplug the steamer.
Remove the Cool Touch Hose. Collapse and remove the Telescopic Pole.
Drain the Water Reservoir, and empty the water from the Water Tank.
Prepare a solution of 1 cup vinegar and 1 cup water.
Slowly pour the solution into the Hose Connector until the Water Reservoir is
about half full, near the top of the hose.
Let the solution stand for about 40 minutes.
Drain the solution by removing the Drain Plug and emptying the solution into a
sink or tub.
Drain the solution from the Hose Connector by tilting the unit over a sink or tub
and pouring the water out.
Pour clean water into the Hose Connector and Water Reservoir inlet and drain.
Repeat this step until the vinegar odor dissipates.
Reassemble the unit.