Singer SteamWorks Pro Instruction Manual - Page 6
Folding Hanger Assembly, Garment Clips Assembly and Use - garment steamer
View all Singer SteamWorks Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Folding Hanger Assembly • Secure the Steam Head Hanger assembly to the Telescopic Pole. • Tilt the hook of the Rotating Hanger and insert it into the hole on the flat side of the Steam Head Hanger. Press gently to lock. • Pull the arm of the Rotating Hanger up until the sides are completely extended. • Lock the horizontal bar in place by aligning the dots on the bar. Garment Clips Assembly and Use • Snap the Garment Clips into the holes on the horizontal bar of the Folding Hanger. • Clip the Garment Clip Bar to the bottom of the Telescopic Pole. • To use, hang the garment from the top clips and secure with the bottom clips, pulling the garment taut to steam or crease. WARNING: Always turn off the steamer before attaching accessories to avoid injury. 6