Smeg BCC02RDMUS User manual - Page 11

EN Use time rotate the container (31) with slow movements from the bottom upwards in order to correctly froth the milk (Fig.M). The result of the steam function can be influenced by the ingredients used. For a good result, we recommend using partially skimmed milk or whole by removing it from the fridge immediately before pouring it into the container. To avoid obtaining a little frothed milk, or with big bubbles, always clean the cappuccino cleaner as described in the paragraph "Cleaning and maintenance". • The maximum continuous steam delivery time is two minutes, if you want to stop the delivery before the automatic stop, press the button (19) again. • After the automatic stop, steam delivery can be restarted by pressing the button (19) . • After heating the milk, clean the inside of the steam wand by dispensing steam for a few seconds, making sure that the tray (14) is fixed to the machine. During steam delivery and after delivery, the steam wand (30) is hot; danger of scalding. • Clean the steam wand every time you use it, to avoid milk residues or clogging. For a complete cleaning of the steam wand see paragraph "Cleaning and maintenance". • A manual rinse cycle is recommended at the end of each use of the steam function. Customization of the quantity It is possible to customize, for each type of dispensing, the quantity of coffee or water dispensed. • Place a cup or large cup under the dispenser. • Press for at least 3 seconds one of the keys relative to the drink to be dispensed. The selected key lights up flashing; the machine emits a double sound to signal the modification of the preset program. • On reaching the desired quantity, stop dispensing by pressing the key again; an acoustic signal indicates the memorization of the quantity. Any customization of the drinks remains saved for future dispensing. To restore the manufacturer's settings, press the keys (9) and (20) simultaneously for at least 3 seconds. The machine emits a single sound to signal the restoration of the factory settings. Turning off the machine • Check that the drip tray (14) is positioned correctly. • If there is no water, the machine remains in the rinse position until the tank is filled. • Press the button (9) , the keys (16), (17), (18), (19) light up flashing in sequence and the machine, if it has dispensed at least one coffee, performs a self-cleaning cycle. At the end of the self-cleaning cycle, the machine switches off. EN - 11