Smeg BCC02RDMUS User manual - Page 5
Save These Instructions
View all Smeg BCC02RDMUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
IMPORTANT SAFEGUARDS EN • Do not place the appliance on or near switched-on gas or electric burners, inside an oven, or near heat sources. • Do not touch hot surfaces. Use handles and knobs. • Do not place the appliance near faucets or sinks. • Never attempt to repair the appliance yourself or without the help of a qualified technician. Failing to do this will void the warranty. • In case of malfunction, have the appliance repaired by a qualified technician. • Do not make any changes to the appliance. For this appliance • Only insert water into the appropriate tank. Use fresh, clean water. • The appliance shall not be placed in a cabinet when in use. • Allow the appliance to cool down before cleaning. • The appliance generates heat and produces hot water and steam during operation. Avoid contact with boiling steam or water. • Do not fill the water container beyond the maximum limit indicated. • Do not use without water in the tank or without a tank. • Make sure that the power outlet used is always freely accessible, because only in this way can it be unplugged when necessary. • To remove the plug from the power outlet, operate directly on the plug. Never pull the cable, it could be damaged. • If the appliance should break down, do not attempt to repair it. • Only use the appliance indoors and at a maximum altitude of 2000 meters. • Use only coffee beans to obtain the powder, do not put already ground coffee in the coffee bean hopper. • Use the device only to prepare coffeebased drinks from grinding coffee beans or to dispense hot water. Other uses are improper. • Do not allow the power supply cable to • Use only original spare parts from the dangle over the edge of the table or other manufacturer. The use of spare parts not surface or to touch hot surfaces. recommended by the manufacturer may • If the plug or power supply cable are damaged, have them replaced exclusively cause fire, electric shock or injury to persons. by the Technical After-sales centre, so as to • Place the appliance on a flat, dry surface. prevent all risks. • Avoid wetting or spraying liquid on the To avoid the risk of injury, do not open the brew chamber during the brew process. appliance. In case of contact with liquid, immediately unplug the cord from the electrical outlet and dry thoroughly: Risk of electric shock! • Check hopper for presence of foreign objects before using. SAVE THESE INSTRUCTIONS ENIT -- 55