Smeg FAB28URBL3 Instruction Manual 1 - Page 19
Cleaning and maintenance
View all Smeg FAB28URBL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EN Cleaning and maintenance 4 Cleaning and maintenance 4.1 Instructions WARNING • Turn off the appliance and unplug it from the mains before cleaning or maintenance. • Do not pull the cable to remove the plug. • Use nonflammable cleaner. CAUTION • Do not use steam jets to clean the appliance. • Do not use cleaning products containing chlorine, ammonia or bleach on parts made of steel or that have metallic surface finishes (e.g. anodizing, nickelor chromium-plating). • Do not use abrasive or corrosive detergents (e.g. powder products, stain removers and metallic sponges) on glass parts. • Do not use rough or abrasive materials or sharp metal scrapers. • Do not clean glass shelves or covers with warm water when they are cold. • Glass shelves and covers are heavy, use special care when removing them. Cleaning the outside of the appliance • The appliance may be cleaned with water or alcohol-based liquid detergents (e.g. window cleaning products). • Avoid aggressive detergents and rough sponges in order not to damage the surfaces. • Use a soft brush to remove dust and fume deposits from the condenser on the rear of the appliance. • Clean the tank above the compressor. Cleaning the inside of the appliance • Clean the inside of the appliance with diluted liquid detergent and warm water, adding a little bit of vinegar. • The door balconies and shelves can be removed: tap them upwards with your fist, first on one side and then on the other in the insertion zone. • Remove any ice thicker than 3-5 mm. Do not use sharp objects or spray products. 4.2 Cleaning the appliance A special antibacterial protection on the appliance's interior walls prevents bacterial growth and keeps them clean. They must nevertheless be cleaned regularly in order to keep them in good condition. 21