Smeg FAB28URBL3 Instruction Manual 1 - Page 24

installed correctly, the door must

Page 24 highlights

Installation If the floor is not perfectly level, use the two adjustable feet on the front part of the appliance Level the appliance horizontally adjusting its feet. Lean the appliance slightly towards the rear part to facilitate proper door closure. CAUTION • Do not press, do not tear or detach the seal from the door. A few days after installation, check that the initial level adjustment is still correct. Make sure that the appliance is still stable and the door seals still close hermetically when it is in operation and loaded with food. If necessary, re-adjust the level and the seals. NOTE: In order for the freezer to be installed correctly, the door must be able to close properly. Ensure that the door seals close hermetically, especially at the corners. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Installation
26
If the floor is not perfectly level, use the two
adjustable feet on the front part of the
appliance
Level the appliance horizontally adjusting its
feet.
Lean the appliance slightly towards the rear
part to facilitate proper door closure.
A few days after installation, check that the
initial level adjustment is still correct. Make
sure that the appliance is still stable and the
door seals still close hermetically when it is
in operation and loaded with food.
If necessary, re-adjust the level and the
seals.
NOTE:
In order for the freezer to be
installed correctly, the door must
be able to close properly. Ensure
that the door seals close
hermetically, especially at the
corners.
CAUTION
Do not press, do not tear or detach the
seal from the door.